The Garrard model 301 engine is the culmination of more than 40 years of experience in designing and manufacturing high-quality turntables. The engine has been designed to provide the professional user and enthusiast the highest quality in its class.
The model 301 has three controls to control the range of engine speeds on the right side, the speed control is in the center and on-off knob on the left side.
The Garrard 301 has very low wow and flutter, ringing almost non-existent. Each of the three speeds is adjustable through a special design that runs a command Foucault is needed to curb the speed to be obtained.
|
Garrard 301 Speed Knob US $17.50
|
SME 3012 & 3009 spacer 10mm for Garrard 301 & 401 other US $45.50
|
Garrard 301 Grease Bearing turntable fully Restored Excellent condition US $1,125.06
|
|
Garrard 301 401 THRUST BEARING GOLDEN BRASS 7mmTOPCLASS US $39.90
|
GARRARD 4HF 301 TPA12 MONO HEADSHELL US $39.00
|
50Hz Strobe Cut Platter for a Garrard 301/401 Turntable US $97.93
|
|
Garrard 301 Baltic Birch/Hardwood Plinth US $550.00
|
Garrard 301/401 motor pulley US $50.00
|
GARRARD 301GRANITE PLINTH BEST QUALITY& BEAUTIFUL RARE US $1,071.73
|
|
Raw Garrard 301 Solid Plinth US $275.00
|
2 x Platter damping rings for idler drive turntables EMT Garrard 301 401 Lenco US $8.69
|
1x GARRARD 301 401 PLATTER DAMPING RING IMPROVE SOUND US $6.30
|
|
Teak Plinth for Garrard 301 US $389.00
|
High-quality edition Teak Plinth for Garrard 301 US $790.00
|
Garrard 301 Transcription Turntable Ad, 1957, 1 pg, Articles, Info, Very Rare! US $17.00
|
|
Garrard 301 Spring Rubbers US $9.46
|
Platter damping ring for EMT Garrard 301 401 Lenco etc US $4.34
|
Garrard Model 301 Turntable Ad, 2 pg, 1956, Articles, Lincoln Continental, RARE! US $9.99
|
|
SME BRONZE 3009 3012 P1 SPACER 4 Garrard 301 401 TD124 US $100.00
|
PLINTH FOR GARRARD 301 TURNTABLE US $39.00
|
Great attention has been given to detail appreciated by the connoisseur such as a suppressor of the unit to prevent the change of clicks, a large turntable with aluminum castings and precision balanced, tempered and finished a strong super-rotation axis, an intermediate wheel and a brake retraction to curtail the freedom of the revolutions of the turntable about the disconnection.
The unit comes with a strobe, with adapter for recording 7 "records (the kinds with big hole and the clip).
Specifications
Plate: 12 "diameter cast aluminum fitted with rubber mat
Board Unit: cast aluminum
Motor: induction motor center housing casting heavy shade suspended six springs tensioned
Voltage: Dual range 100 to 130 and 200 to 250 volts
Frequency: 50 or 60 cycles according to the motor pulley fitted
Consumption: 16 Watts
Wow: less than 0.2%
Flutter: less than 0.05%
Rumble: almost non-existent
Speed range: 33 to 34, 44 to 46 and 76 to 80 rpm
Finish: High quality enamel broken black with accessories
Weight: 16 kg
US $1,375.00